Mold Inspection And Testing Round Rock

How much does Mold Inspection And Testing Round Rock cost?

The cost for mold removal will differ dependent upon many factors, for example, what number of square feet of mold was discovered, was asbestos tried and comes about were sure, is lead paint an issue, does it stretch out in behind kitchen or restroom cupboards, can the region be sealed off effectively, is there a great deal of materials to be cleaned and disinfected, has additional damage happened because of the mold damage, and so on. With such a large number of factors, it is exceptionally difficult to nail down a cost unless an expert evaluation has been.

The greatest concern a mold remediation is containing the mold and setting a negative pressure environment to prevent further contamination. The use of HEPA filtration units are essential in ensuring the health of workers and building tenants. The reason this is so imperative is that individuals are more inclined to health concerns when exposed to specific species as well as vast amounts of mold spores and amid the removal procedure the spores become airborne.

  1. Distinguish the cause of the mold growth
  2. Decide whether moisture source has been removed
  3. Determine the type of mold

Ordinarily, a private mold assessment will cost from $350 to $2000. Business mold assessments will commonly go from $750-$5,000.

The three most critical factors in deciding a definitive cost of a mold remediation venture are the accompanying:

  1. What amount of the house or business has mold?
  2. What sort of materials is contaminated?
  3. How simple is it to get to the mold?

Mold remediation undertakings can extend from two or three thousand dollars over ten thousand dollars.  The mold remediation undertaking will run from $1,700 to $9,000 while most business ventures are typically more. On the off chance that asbestos containing materials are found to be present the cost will  rise. You shouldn’t simply run with the least expensive quote, enlist the firm that will do the best mold removal and guarantee that the activity is done well and remain behind their work!

Best Tips for Mold Inspection And Testing Round Rock

There is now a lot of evidence to connect black mold with Sudden Infant Death Syndrome (SIDS) and miscarriage. The death of an infant can be devastating for a family so can losing a baby due to miscarriage. It is vital that any steps needed to prevent these awful events should be taken.

It is not just the fact that black mold is toxic that means that it is dangerous to infants. One way that it is believed to work is that black mold spores end up in baby's mattress and they releases harmful chemicals from the mattress into the air and the baby breathes this lethal gas. This process is believed to be responsible for many cases of SIDS.

Black mold has also been associated with miscarriage. It seems that exposure to mold toxin could be the cause of many women losing their baby during pregnancy. Not all mold is toxic, but it is almost impossible to tell this by just looking. The usual way to determine toxicity is by sending the mold to be tested in a laboratory. This is why it is probably a good idea that pregnant women treat all mold as if it were toxic and keeping well away from it.

The best way to stop black mold from becoming an issue for infants and those who are pregnant is to prevent it occurring in your home, and if you do have it to quickly eliminate the problem. This can be a difficult issue for those who are living in rented accommodation and have a landlord who just won't do anything about your mold problem. The advice here is to find somewhere else to stay either permanently or until the problem is fixed.

The real danger comes when black mold is growing and you are not even aware of it. Mold likes damp places that are poorly ventilated so make sure you check your attic and basement and any other cubby holes. Of course, if you are pregnant you will want someone else to conduct this search for you. In most instances eradicating the mold will be fairly straight forward so long as you discover it all. Pregnant women should not be involved in any part of the cleaning up process, but be kept well away from the area in case toxic spores are released into the air. When the mold is completely removed you will then need to take measures to make sure it doesn't back again.

Mold Problems

Interesting Facts About Mold Inspection And Testing Round Rock

You can hardly find an individual who had not suffered from black mold. Mildews and black molds are the problem of the day. They grow on practically anything and amplify very fast. Different types of molds and mildews are found in nature. They grow naturally on dead organic substances. Molds collect their nutrition from organic matters and decompose complex molecules into simpler forms.

When dead animals, vegetables, foods or any other organic substances are abandoned in nature, they decompose naturally due to mold formation. Even if you leave any food, covered or uncovered, untouched for long, it starts smelling bad. The reason is mold.

Indoor mold growth can really be frightening if not inspected early. Among different types of molds and mildews black mold is frequently found in environment. Toxic black molds when grow inside your house lead to various health problems. What is black mold actually and how it is toxic?

How to identify and kill black mold:

It may be difficult for home dwellers to inspect and locate the exact place of mold growth. Any exposure to toxins can lead to serious ailments. It is suggested to take help from professionals. They conduct a thorough investigation to find out the degree and location of mold growth. Mold testing result shows the type of mold that has infected your house.

With mold testing done, you can start mold cleaning process. Organic mold removers can effectively remove molds and mildews from your home. Unlike bleaches, natural cleaning products kill molds permanently. Top of all, natural products are free from side effects and do not affect your health adversely.

Mold Specialist

How do I hire a Mold Inspection And Testing Round Rock Company?

Mold remediation is the process of removing mold from a home or building. Mold remediation should only be conducted by trained professionals, as mold can cause health problems in individuals. If you suspect mold growth in your home in places such as in between walls on in areas that are inaccessible, call a professional to give you a mold assessment.

Everyone has seen mold, usually in the bathroom when tiles haven't been cleaned in a long time, but mold can grow in many different places, for example wet or damp clothes that have been left where they can't dry for several days or in homes where a water pipe has been leaking or pipes have burst. Flooding is another cause of mold growth. Even something as simple as building over damp concrete can cause mold to thrive.

Mold grows when spores attach to a suitable surface such as a damp one. Here mold is able to proliferate and if unchecked, can cause problems similar to allergy reactions in humans and pets. Minor symptoms include things like itchy throat and eyes, sneezing and coughing. Respiratory problems are also a concern. Mycotoxins are types of mold that produce toxins. While the CDC says there is currently no conclusive evidence of harmful human effects, some people believe that neurological problems can occur or even death.

If you see a small amount of mold, often it can be cleaned with a bleach solution, but if you see extensive mold, call in a professional. Mold remediation requires wearing a full face respirator, protective clothing and gloves. HVAC systems should be thoroughly inspected and if needed, removed. Those removing mold will properly dispose of items contaminated with mold like carpets, wallpaper and upholstery.

According to the Centers for Disease Control, dampness can also cause dust mites and microorganisms such as bacteria to proliferate. Roaches and rodents tend to thrive in damp areas as well as mosquitoes.

Be sure to call a professional if you find mold before there are any health repercussions. Mold remediation should only be undertaken by a trained and licensed professional.

Mold In Air Ducts

Which Mold Inspection And Testing Round Rock service provider is performs 24/7 water damage services?

Mold is a type of tiny living organism from the fungi family. The spores thrive on moisture and they spreads rapidly with the presence of moisture. They can grow on any materials and surfaces, in particular on objects made of cellulose.

Recent studies show that most of the homes are having some sort of mold infections due to unknown indoor moisture problems. This leads to the rapid growth in damp areas like bathroom, water-damaged basement, leaking pipes and roofs. Indoor mold growth poses great health threats and should be removed quickly to prevent it from spreading. Thus mold detection is very important, one should be very observant to the presence of this tiny organism and take appropriate actions to stop it from mushrooming.

5. DIY test kits for mold detection.

Get yourself a do-it-yourself test kit to help detecting harmful molds in your home. These test kits can be obtained from most of the home improvement and hardware stalls. They are easy to use, by following the instructions you are able to get the results instantly.

6. Get help from certified inspector.

When you are experiencing mold exposure like symptoms but fail to detect any presence of this hazardous living organism, you can get help from certified mold inspectors. Their expertise in mold detection can help to identify the exact spots of possible hidden growth.

Mold On Clothes


Round Rock

For More Information on Mold Inspection And Testing Round Rock

 

Mold Inspection And Testing Round Rock

How much does Mold Inspection And Testing Round Rock cost?

The cost for mold removal will differ dependent upon many factors, for example, what number of square feet of mold was discovered, was asbestos tried and comes about were sure, is lead paint an issue, does it stretch out in behind kitchen or restroom cupboards, can the region be sealed off effectively, is there a great deal of materials to be cleaned and disinfected, has additional damage happened because of the mold damage, and so on. With such a large number of factors, it is exceptionally difficult to nail down a cost unless an expert evaluation has been.

The greatest concern a mold remediation is containing the mold and setting a negative pressure environment to prevent further contamination. The use of HEPA filtration units are essential in ensuring the health of workers and building tenants. The reason this is so imperative is that individuals are more inclined to health concerns when exposed to specific species as well as vast amounts of mold spores and amid the removal procedure the spores become airborne.

  1. Distinguish the cause of the mold growth
  2. Decide whether moisture source has been removed
  3. Determine the type of mold

Ordinarily, a private mold assessment will cost from $350 to $2000. Business mold assessments will commonly go from $750-$5,000.

The three most critical factors in deciding a definitive cost of a mold remediation venture are the accompanying:

  1. What amount of the house or business has mold?
  2. What sort of materials is contaminated?
  3. How simple is it to get to the mold?

Mold remediation undertakings can extend from two or three thousand dollars over ten thousand dollars.  The mold remediation undertaking will run from $1,700 to $9,000 while most business ventures are typically more. On the off chance that asbestos containing materials are found to be present the cost will  rise. You shouldn’t simply run with the least expensive quote, enlist the firm that will do the best mold removal and guarantee that the activity is done well and remain behind their work!

Best Tips for Mold Inspection And Testing Round Rock

Molds, mildews and fungi can be found everywhere, indoors or outdoors. They can be found in just about any household object and even in the air we breath. Molds love humid and dark places that lack circulating air, they can grow rapidly in such environments.

Many types of molds, mildews and fungi are not very harmful. In the case of Penicillium they have even been life saving. There is a dark side though. A number of molds can be dangerous to your health. The EPA estimates that there are about 50-100 types of household mold that can potentially create health problems.

These problems include; allergic reactions, asthma attacks, flu-like symptoms, migraines and much more. Some studies have shown that mold can even be linked to nervous and immune system complications that have resulted in death.

Mold is a serious problem and preventative measures may be the best way of ensuring your health. These 5 tips will kick start your mold defense.

1. Use a Dehumidifier - Dehumidifying units are reasonably priced these days and should be used in the damp areas of your house. If you have a humidity in the 60% range (or higher) you should consider using a dehumidifier. It will help clear the air of moisture, and mold needs moisture to propagate. If you decide to use a dehumidifier remember to change the water frequently, and disinfect the unit to make sure it doesn't become mold infested itself.

2. Stay on Top of Your Cleaning - Anywhere that is dirty, moist and dungy is a good breeding ground for mold. If you have spots like this around your house, make sure to diligently clean them. A quick wipe isn't enough - scrub with a water and bleach combination to really prevent mold from forming. Make sure you are properly ventilated when using such chemicals.

3. Improve Air Circulation - Certain areas in your house traditionally suffer from poor air circulation. Places like the attic, basement and closets are the most likely spots. There are ways to make sure the air keeps circulating. Install ceiling fans in the basement, install vented doors on closets and make sure you have an adequate number of roof vents in the attic. Make sure the air keeps circulating all over your house. This can help stop mold from beginning to grow.

4. When Spills or Leaks Occur: Act Quickly - One of the most effective ways to make sure mold doesn't begin forming in your house is to act quickly when leaks, floods or spills happen. If wet materials or areas are dried within 24-48 hours, it is most likely that mold wont even begin to form! Dry areas quickly and properly. If some object or material isn't going to dry quick enough, remove it or replace it.

5. If All Else Fails: Call in a Pro - Most towns have some sort of cleaning and/or restoration company that is designed to deal with these problems. If you suspect a serious mold problem in your house - contact them. They have the tools, knowledge and safety equipment to deal with serious mold problems. They can properly assess and treat the threat. Make sure you get recommendations and that the company is insured.

If you follow the first four steps, you may never need the fifth. If mold does become a huge problem though, don't ignore it. If you see a lot of mold, that is a sign there may be A LOT more that you can not see - that is when you need to have a professional come in.

Mold can be prevented, and in worst case scenarios it can be removed and your house restored. For More Info on the Dangers of Mold:

Highland Restoration

Mold Mitigation

Interesting Facts About Mold Inspection And Testing Round Rock

Mold spores. They almost sound like alien invaders from a 1950's sci-fi movie --"Attack of the Killer Mold Spores!" But that description may not be too far off the mark. Mold is dangerous. It can be more prevalent and can cause more health problems than termites, carbon monoxide, asbestos, or radon. In fact, mold is everywhere and impossible to get rid of in nature. According to the EPA website, "There is no practical way to eliminate all mold and mold spores in the indoor environment; the way to control indoor mold growth is to control moisture." From one third to one half of all buildings in the United States have the damp conditions necessary to facilitate the growth of mold, according to the Consumer Product Safety Commission.

Mold and mold spores can cause serious health problems and, in the case of someone with mold sensitivities, even death. Many people are vaguely aware of the health concerns when it comes to mold but most do not know that mold can also cause serious damage to a house or building (similar to a termite infestation.) When it comes to protecting your family and your home, fighting and preventing mold should be at the top of every homeowner's list.

WHAT IS MOLD?

The simple answer: molds are part of the fungi kingdom, similar to yeasts or mushrooms (the antibiotic Penicillin is actually a mold.)Mold is a living organism, a part of nature, and even has a beneficial function - it breaks down all of our dead organic matter. Mold reproduces by releasing tiny spores, invisible to the naked eye, into the air. These spores land in moist areas and begin to grow and spread. While there are hundreds of thousands of varieties of mold, none would exist without the presence of moisture, air, and something to feed on. Since mold will always exist outdoors, it is important to control the one ingredient a homeowner doesn't need inside the house - moisture.

Mold can grow on rotting wood, grass, weeds, and compost piles. The problem is that it can also grow where you don't want it to - indoors. It can be found on food or clothing, in bathrooms and attics and damp basements, on carpeting, and even inside the walls of a house. Mold can feed on the wood in the wall, breaking down the materials as it spreads unseen throughout a house. As the mold digests organic material, it continues to spread to find new food sources.

Spotting mold can be easy, if the mold colony is visible. Mold comes in a variety of colors (including white, black, green, gray, brown, and more), bunching as spots or discolorations. If the mold is not visible, someone may not recognize mold is present until it is late in the process. People discover mold when there is physical damage to a structure or an increase in musty smells. Sometimes mold won't be found until the occupants experience health problems. By then, it may be too late. Whenever a house or building has an overexposure to moisture, it is important to inspect for mold. Moisture overexposure can come from many sources, including:

o Floods

o Roofs or basements that leak

o Irrigation or fire sprinklers

o Shower or bath water

o Sink or sewer overflow

o Humidifiers

o Plumbing leaks

WHY SHOULD I WORRY ABOUT MOLD?

There are two main reasons to worry about the spread of mold in a building. The most important consideration - mold can cause health problems. The second consideration - property damage. Frank Foreman, President & CEO of NO ODOR, Inc, a mold remediation company, believes mold is coming to the forefront because everyone is learning that mold damage can affect property value.

Let's start with the health issues. Molds produce allergens that can cause reactions such as sneezing, runny noses, even asthma attacks in those allergic to it. It can even cause irritation to the nose, throat, lungs, and eyes to those who are not allergic. Certain molds can also release toxins (mycotoxins) that cause more serious problems. According to the Mold Help Organization, exposure to these mycotoxins could cause people "to suffer from a myriad of serious symptoms and illnesses such as chronic bronchitis, learning disabilities, mental deficiencies, heart problems, cancer, multiple sclerosis, chronic fatigue, lupus, fibromyalgia, rheumatoid arthritis, multiple chemical sensitivity, bleeding lungs and much more" (http://www.mold-help.org/content/view/478/).

Because many people are not as aware or concerned about the health threats of mold, it is also important to consider the damage it can cause to property. Everyone tends to pay more attention to a problem when it affects the wallet. A home or business is the largest investment most people have. A colony or colonies of mold can cause severe devastation. According to the EPA website, "If you already have a mold problem - act quickly. Mold damages what it grows on. The longer it grows, the more damage it can cause" (http://www.epa.gov/mold/moldcleanup.html).

Mold can cause structural damage to a building, because it feeds on and breaks down the organic matter (wood, mostly) within the structure. When mold grows in the walls, on insulation, or under carpeting, these items must be removed from the building. In addition to the damage caused to the building, mold may destroy personal items in the home. It can attach to personal property which may be very difficult or impossible to clean. Often the item will have to be destroyed because the mold cannot be completely removed.

WHAT CAN BE DONE ABOUT THE MOLD?

For the most part, since mold is everywhere, it is impossible to completely avoid all indoor molds. The key to preventing mold is to control the moisture levels indoors. The EPA website states, "If there is mold growth in your home, you must clean up the mold and fix the water problem. If you clean up the mold, but don't fix the water problem, then, most likely, the mold problem will come back" (http://www.epa.gov/mold/moldbasics.html).

For small areas, usually a moldy section of 9 to 10 square feet, the home or business owner can usually clean up the mold themselves. For larger areas, it is important to hire a professional mold removal contractor to make sure the problem is taken care of safely.

If you have a small patch of black, green or gray colored spots, Frank Foreman, of NO ODOR, Inc., has a smart tip to determine whether or not it is mold: put some hydrogen peroxide on the growth and watch the reaction. Almost everyone has one of those brown bottles of the 3% hydrogen peroxide solution in their medicine cabinet, so he suggests putting it in a clean spray bottle and spraying the colored spots. If the solution runs down the wall and there is no reaction, then the spots are not growths of mold (it could possibly just be dirt.) Since mold is a living organism, when sprayed with the hydrogen peroxide, there will be an oxidation process. If you hit it and the growth starts to foam up with white foam, then you know you are dealing with mold.

For small amounts of mold, many sources recommend using a combination of water and detergent to clean the moldy surfaces. However, Frank Foreman recommends using only products that are approved by the EPA to kill mold. He further states that care and precaution need to be taken when doing the cleanup by an individual. "Mold is a living organism and it can travel easily when disturbed. Someone may wash away half of the mold and the other half might release mold spores that can escape to another source of moisture in the home. Or worse, into the A/C or heating system which can spread mold spores to every room in the house," claims Foreman.

Foreman also suggests that someone with a mold problem should really educate themselves before hiring a professional to remove toxic mold. "The mold removal industry is completely unregulated. There are no federal, state, or local regulations that govern mold removal professionals." This means, according to Foreman, with no standards, there is no way to prove the job was done or that it is done right. "Only seventy to eighty percent of all mold removal jobs are done right, which means the property owner is going to have residual problems."

He says that it is important to shop around, to get references, and to scan the Internet to learn as much as possible about toxic mold and mold removal. "Education is the key. Learn the basics so you can talk to the remediation expert and you'll have a good idea if he or she really knows what they're doing."

Mold removal methods vary from company to company. But the process can be complicated and expensive. For example, if a 10' x 10' bedroom has two walls infested with mold, it may be necessary to seal off that portion of the house, remove all wall boards until there are no more visible signs of mold growth. Next, the remediation pro will have to hand sand away the mold. Then, a mold killing detergent will be washed over the surface. The exposed area will then be HEPA vacuumed to remove remnant spores. After the area is tested to make sure there is no more mold, new walls will have to be built back up and painted. As you can see, the process can be time consuming and very expensive. However, to save on excessive destruction, some professionals have been employing fiber optic technology to view within the walls or ceilings, looking for mold growth, before tearing down all the drywall.

If you have had a flooding problem or a major water leak, it is also important to contact your insurance company. Many do not know that insurance may cover the mold removal as well. However, most insurance companies are starting to put limits on mold removal coverage (sometimes keeping caps at $5000 to $10,000.) While it may sound like a lot of money, the insurance company will be giving you money to fix the damage and remove the mold. The mold removal process may cost more than repairing the damage caused by the water. For example, if the roof of a house comes off during a storm and causes water damage to the house, the insurance company may give a lump sum to cover the repairs to the roof, the damage inside, and the mold problem. By accepting their lump sum, you have to pay to replace the roof and damage from water but the money also has to cover the costs to remove the mold that may come days, weeks, or months later.

HOW CAN I PREVENT MOLD FROM COMING BACK?

Once you have removed the entire mold infestation from your property, it is still important to control moisture levels in the structure.

- If there is any kind of flooding, it is imperative you remove the water within 24 to 48 hours.

- Whenever possible, move wet items to a dry, well-ventilated place or outside to speed up the drying process. Remove drywall up to the height of the water level. Remove carpeting as soon as possible.

- Keep the indoor humidity low. If possible, keep below 60 percent relative humidity.

- If condensation or moisture collects on windows, walls or water pipes, dry the wet surface and reduce the moisture. Condensation can be a sign of high humidity.

- Keep gutters clean and make sure water drains away from the building to prevent it from collecting around the foundation.

- Run or install venting fans in high moisture areas, like the bathroom.

- Run a dehumidifier in moist areas, such as a basement or bathroom.

- Ventilating areas can help reduce moisture, as well as keeping the temperature up or the air conditioner on. However, aim the air conditioning vents away from the condensing surfaces to prevent cold spots where moisture condensation can occur.

- Adding thermal insulation to walls, ceilings, and pipes can help, too (in fact, rust spots on any water pipes could be an indication there is too much moisture in a room. Adding insulation to the pipes is a good idea.)

Mold can be a very serious problem in homes and businesses and it is important to take care of the problem as soon as possible. The consequences to health and property can be severe. While remediation of mold can be expensive, the damage mold can cause could be even worse. Frank Foreman has seen many cases where it is actually cheaper for the homeowner to knock down and rebuild an entire house rather than remove the existing mold infestation.

Keep in mind some of the potential signs that mold may be growing within a property:

o Unexplained discoloration on a surface

o Musty or earthy odor

o Dark spots on or around vents

o Water stains anywhere

o Peeling or curling of floors or wallpaper

Do your homework and hire a professional to handle even moderate mold problems as soon as possible. If one is not sure where to look for a mold removal and remediation specialist, there are services that can help everyone find a local professional.

Whenever a home or business owner believes there are signs of mold growth within their property, he or she should contact a professional as soon as possible to avoid future problems or costs. Attack those "Killer Mold Spores" before your own personal home invasion gets any worse.

Mold House

How do I hire a Mold Inspection And Testing Round Rock Company?

Molds, mildews and fungi can be found everywhere, indoors or outdoors. They can be found in just about any household object and even in the air we breath. Molds love humid and dark places that lack circulating air, they can grow rapidly in such environments.

Many types of molds, mildews and fungi are not very harmful. In the case of Penicillium they have even been life saving. There is a dark side though. A number of molds can be dangerous to your health. The EPA estimates that there are about 50-100 types of household mold that can potentially create health problems.

These problems include; allergic reactions, asthma attacks, flu-like symptoms, migraines and much more. Some studies have shown that mold can even be linked to nervous and immune system complications that have resulted in death.

Mold is a serious problem and preventative measures may be the best way of ensuring your health. These 5 tips will kick start your mold defense.

1. Use a Dehumidifier - Dehumidifying units are reasonably priced these days and should be used in the damp areas of your house. If you have a humidity in the 60% range (or higher) you should consider using a dehumidifier. It will help clear the air of moisture, and mold needs moisture to propagate. If you decide to use a dehumidifier remember to change the water frequently, and disinfect the unit to make sure it doesn't become mold infested itself.

2. Stay on Top of Your Cleaning - Anywhere that is dirty, moist and dungy is a good breeding ground for mold. If you have spots like this around your house, make sure to diligently clean them. A quick wipe isn't enough - scrub with a water and bleach combination to really prevent mold from forming. Make sure you are properly ventilated when using such chemicals.

3. Improve Air Circulation - Certain areas in your house traditionally suffer from poor air circulation. Places like the attic, basement and closets are the most likely spots. There are ways to make sure the air keeps circulating. Install ceiling fans in the basement, install vented doors on closets and make sure you have an adequate number of roof vents in the attic. Make sure the air keeps circulating all over your house. This can help stop mold from beginning to grow.

4. When Spills or Leaks Occur: Act Quickly - One of the most effective ways to make sure mold doesn't begin forming in your house is to act quickly when leaks, floods or spills happen. If wet materials or areas are dried within 24-48 hours, it is most likely that mold wont even begin to form! Dry areas quickly and properly. If some object or material isn't going to dry quick enough, remove it or replace it.

5. If All Else Fails: Call in a Pro - Most towns have some sort of cleaning and/or restoration company that is designed to deal with these problems. If you suspect a serious mold problem in your house - contact them. They have the tools, knowledge and safety equipment to deal with serious mold problems. They can properly assess and treat the threat. Make sure you get recommendations and that the company is insured.

If you follow the first four steps, you may never need the fifth. If mold does become a huge problem though, don't ignore it. If you see a lot of mold, that is a sign there may be A LOT more that you can not see - that is when you need to have a professional come in.

Mold can be prevented, and in worst case scenarios it can be removed and your house restored. For More Info on the Dangers of Mold:

Highland Restoration

Mold Specialist

Which Mold Inspection And Testing Round Rock service provider is performs 24/7 water damage services?

Testing for Stachybortrys mold is what professional technicians test for in homes and buildings. This is because the Stachybortrys mold is also called black mold and cane be very toxic. This mold is a greenish black slimy mold that is most often found on cellulose products, such as wood and paper. It does have a strong smell, so one clue you should do some testing for Stachybortrys is the strange musty smell that you get.

You can do you own Stachbortrys black mold testing by using a special mold testing kit. This will save you a lot of money that professional testing for Stachybortrys mold costs and you do the same thing. In the testing kit for black mold, there is a petrie dish containing a disc. You won't have to touch any black mold when you use this kit, so there is no danger involved. You just expose the disc to the air for about two hours and them close the lid to let it incubate for 48 hours. When you open it after that time, if there is a fungus growing on the disc, then this means that you have mold. It may or may not be black mold.

The main thing you have to look at when testing for Stachybortrys mold is that if you can smell mold you do have a problem. It is not enough to do the Stachybortrys black mold testing and to clean up the mold. If you have a problem with black mold, it means you also have a problem with water or moisture and this needs to be addressed. If you don't look for and solve this problem, the mold will only come back. Testing for mold is only part of the solution. You also have to do testing to find how the water is getting in.

Sometimes the testing for Stachybortrys mold is only easy to solve. The problem causing the black mold could be condensation building up on the pipes in your basement or it could be the result of not having enough heat in the basement. However, there are times when the Stachbortrys black mold testing calls for extreme measures for you to get rid of the mold. If, for example, the source of the black mold is the underlay under the carpet, this means you will have to take up all the carpet and throw it away. Just testing for Stachbortrys mold will not help you get rid of the toxic mold in your home.

Mold Specialist


Round Rock

For More Information on Mold Inspection And Testing Round Rock